Specification:
KXT-GS1510 reinforced non-asbestos joint sheet is made of non-asbestos gasket sheet reinforced with tanged 0.2-0.25mm Carbon Steel or other metal foil. It reinforced non-asbestos joint sheet is extensively applied in manufacturing various motor gaskets. It reinforced non-asbestos joint sheet is a new material that will substitute asbestos products. The non-asbestos beared sheet can also be rinforced with double-face foil.It is made by materials of three cascades. An non asbestos beater sheet is inserted into a convexo-plane metal frame. It is produced by specially pressing and sticking process. This kind of sheet is be seized of the characteristics such as good compressibility and resilience, small stress relaxation, fine compensation function for unevenness of sealing surfaces and long working life. Permanently elastic, even in hot-cold cycles over the entire temperature range, noaging, no brittleness, no hot or cold flow, long time uniform compressibility and resiliency independent of temperature.
Application:
The product has excellent performance in dilatability, sealing equality and long life etc., Mainly applied in automobile farming machine, motorcycle and engineering,etc.It reinforced non-asbestos joint sheet is also can be used in high strength gaskets and cylinder gaskets etc. Available with SS304. wire mesh insertion. Also available with anti-stick silicon resin or graphite coated.
Main Specification:
|
Tensile strength(MPa)
|
12.7
|
|
Compression(%)
|
10±5
|
|
Recovery(%)
|
40
|
|
Density(g/cm3)
|
1.7-1.9
|
|
Maximum Service Temperature(℃)
|
150~350
|
|
Sealing performance
|
<0.5cm3/min
|
|
Common Size(mm)
|
Width：1500,1350; Length：1000,1350mm,2000,4000;
Thickness：0.5-5mm
|
Hot Tags: Reinforced Non-asbestos Joint Sheet, China, Manufacturers, Suppliers, Factory, Low Price, Price List, High Quality
